4. Licensing: Single-User Licences¶
This chapter explains how to request, install and move single-user (node-locked) UniPlot licences and what to do when a licence is rejected or not found.
4.1. Activating a Single-User Licence¶
4.1.1. How do I activate a single-user (node-locked) licence after installing UniPlot?¶
Since R2020 the licence key alone does not activate UniPlot. The key and the download password you receive after the purchase are used to download and install UniPlot. The procedure below applies to licence keys that begin with 57-. After the first start UniPlot shows the licensing window with “EVALUATION” and “0 DAYS REMAINING”; this is normal for a new installation. To activate the licence:
Download and start
Setup.exe, accept the licence terms, enter your full licence key on the next page and click Next. Keep all components selected and choose the installation folder. The default isC:\Program Files\UniPlot Software\<version>; a folder such asC:\UniPlot\<version>gives you full access to all files in the installation folder.Start UniPlot. In the licensing window click Request license. UniPlot opens your e-mail program with the UniPlot support address and a file
LR_UniPlot-<release>_<user>_<date>.requestalready attached.Send the e-mail unchanged. Do not edit the subject, the text or the attachment, and check that the
.requestfile is really attached.You receive a
.liclicence file. Save it on your computer, click Install license file in the licensing window and select the file. Click Exit UniPlot and start UniPlot again. The licensing window no longer appears until the licence expires or has to be extended. See How do I install the licence file (.lic) that I received?.
The request file contains information about the computer and the Windows user. Create it on the PC, and under the Windows user account, on which you will work with UniPlot; the licence file cannot be created in advance and does not work on another PC. If you have several licences, repeat the steps on every PC with the key that belongs to that PC. If the PC has no e-mail program or no internet access, see How do I activate UniPlot on a PC without internet access or without an e-mail program?.
See also: Dialog Box=>License.
4.1.2. What is the difference between licence key, download password, serial number and licence file?¶
Four different items are involved:
Licence key: the full key from your delivery e-mail (a single-user key begins with
57-). It is entered during the installation of UniPlot and is stored in the request file.Download password: sent with the licence key in your delivery e-mail. It is used on the UniPlot download page.
Serial number: shown in Help > About UniPlot. It identifies your installation and is not the full licence key.
Licence file (
.lic): created for your computer from the request file that UniPlot generates. Only this file activates UniPlot.
Keep the delivery e-mail with the key and the password. You need the key again for later re-installations and new PCs.
See also: Help=>About UniPlot, How do I activate a single-user (node-locked) licence after installing UniPlot?.
4.1.3. Where do I find my licence key or serial number?¶
Start UniPlot and select Help > About UniPlot. The dialog shows the version number and the serial number of your installation. If the licensing window blocks the menu because UniPlot is not licensed yet, use the licence key and the download password from your delivery e-mail.
The serial number is not the full licence key. If the installer asks for the licence key and you only know the serial number, look for the delivery e-mail or contact UniPlot support.
See also: Help=>About UniPlot.
4.1.4. Why does UniPlot show “0 days remaining” or “Evaluation”?¶
UniPlot starts in evaluation mode and shows “0 DAYS REMAINING” whenever it cannot find a valid licence file for the current Windows user and computer. Typical causes:
New installation: the licence has not been requested yet. Follow How do I activate a single-user (node-locked) licence after installing UniPlot?. Entering the licence key again does not help.
Licence file not found: current releases read the licence file only from the per-user folder described in How do I install the licence file (.lic) that I received?. See After installing a new UniPlot version, the licence is missing or UniPlot says the licence expired. How do I fix this?.
Time-limited licence has run out (trial, interim or student licence). Re-installing UniPlot does not change this because the old licence file is still used. Create a new request (Request license or Save request) and send it with your key. See My trial or temporary licence has expired. How do I continue?.
PC, Windows user or computer name changed: see UniPlot shows “The license is not valid for the current user and/or computer”. What changed?.
The licence file does not cover the installed release, for example a licence file for a newer release used with an older release. Install the matching version. See Does my licence work with a newer UniPlot version? Do I need a new licence file after an update?.
The licence was generated with a wrong validity period. Send a new request file; the licence file is then corrected and re-issued.
4.1.5. How do I install the licence file (.lic) that I received?¶
Save the
.licfile in a normal folder (for example on the desktop) and do not rename it.Start UniPlot. In the licensing window click Install license file, browse to the file and select it.
Click Exit UniPlot and start UniPlot again.
The licence file that UniPlot uses is stored per Windows user as %APPDATA%\FEV GmbH\R2020\UniPlot\<Windows user name>.lic. The part FEV GmbH\R2020 (the SubPath) is set in the product ini file and is normally this value. Current releases read the active single-user licence file only from this location. A .lic file in another folder, for example in the Program folder of the installation, is not read.
The file only works on the computer and for the Windows user that created the .request file. If it does not work, see I selected the .lic file with “Install license file”, but nothing happens or the licensing window comes back. What can I check?. Keep a copy of the .lic file in a safe place.
See also: Dialog Box=>License.
4.1.6. UniPlot does not accept my licence key during installation, or shows an error at start-up right after installation. What is wrong?¶
Check the key you entered in the installer:
Enter it exactly as written in the delivery e-mail, with the dashes in the right places.
Do not copy blanks. A key that contains a blank produces an error message at start-up if the blank is entered as part of the key. Remove the blank, uninstall UniPlot, install it again with the corrected key and then request the licence file as usual.
If an old key is pre-filled in the key field (the page that follows the licence terms in the setup), replace it with the new key.
Do not enter the serial number or the download password instead of the key. See What is the difference between licence key, download password, serial number and licence file?.
4.1.7. I installed a new licence key, but UniPlot still creates the request file of my old (evaluation) key. How do I get a licence for the new key?¶
The request file contains the licence key that was entered when UniPlot was installed. If an older key (for example an expired evaluation key) was used, every new request refers to that old key and no licence can be issued for the new key.
Download UniPlot with the download password of the new key and install it with the new key.
Start UniPlot and create a new request file. It is now generated for the new key.
Send it to UniPlot support and install the
.licfile you receive.
You can keep the old installation until the new licence works. Support can also tell you for which key a request file was created.
4.1.8. How do I activate UniPlot on a PC without internet access or without an e-mail program?¶
The licence request does not have to be sent from the PC that runs UniPlot. A single-user licence, including a trial licence, can be activated completely offline, and UniPlot needs no internet access afterwards.
On a PC with internet access, download the UniPlot setup and copy it to the offline PC. Install UniPlot there with your licence key.
Start UniPlot. In the licensing window click Save request (German: Computerinformation speichern) and save the
.requestfile on the local disk.Copy the file to a PC with e-mail (USB stick, network share) and send it to UniPlot support, together with your licence key.
Copy the
.licfile you receive back to the offline PC, click Install license file in the licensing window and restart UniPlot.
If saving the request fails with a message that the assembly liblmxnet cannot be found, UniPlot support can supply the licensing prerequisites that have to be installed before UniPlot.
See also: Dialog Box=>License.
4.2. Request and Licence File Delivery Problems¶
4.2.1. Clicking “Request license” does nothing or no e-mail is created. How do I send the request?¶
Request license creates the e-mail with the default mail client of Windows. It does not work if no mail client is installed, if several mail programs are installed and the wrong one is used, or if a security policy blocks the mail. Use this workaround:
Click Save request and save the
.requestfile on the disk.Create an e-mail manually in your mail program or webmail, attach the saved
.requestfile (do not edit it) and send it to UniPlot support with your licence key and the Windows version.If your company policy blocks attachments, send the file zipped or through a file-sharing link. An IT contact may also send the request on your behalf; the file must still have been created on the target PC.
Install the
.licfile you receive with Install license file and restart UniPlot.
If both buttons report an error, send the files of the UniPlot log folder (C:\Users\<user>\Documents\UniPlot\log) to UniPlot support.
4.2.2. The e-mail with my request arrived without the .request file. What happened?¶
A licence can only be created from the *.request file that UniPlot generates. Some company mail gateways remove the attachment and replace it with a download link and a separate password e-mail. The receiving side then gets a mail without the file, or cannot open the link.
Restart UniPlot, click Request license again and send the e-mail without modifying it. Check in the sent folder that the
.requestfile is attached.If your mail system converts attachments to links, send the file as a plain attachment by another route (for example webmail), ask your IT department to allow it, or provide the link together with the password so that the recipient can open it.
Send only one request. Every new request creates a different file.
4.2.3. I did not receive the licence file, or the .lic attachment is blocked by my mail filter. What can I do?¶
Check the spam folder and the mail filter of your company. Licence files are sent to the address that sent the request.
Check that the request e-mail really reached UniPlot support with the
.requestfile attached and the correct key. If you ordered several licences, each user has to send a request for his own key.Many company filters remove
.licattachments. Ask UniPlot support to send the file again in another form: as a ZIP archive, as a ZIP with a changed extension (for example.zi_, which you rename back to.zip), or as a download link with a password.UniPlot support can send the licence file for an existing request again.
4.2.4. I lost my .lic file or re-installed UniPlot on the same PC. Do I need a new licence?¶
No new licence is needed if UniPlot is installed again on the same PC for the same Windows user. You can continue to use the same licence key and the licence file. If you no longer have the file, send the .request file (or create a new one with Request license or Save request) together with your licence key to UniPlot support, which can send the licence file again. The licence key alone is not enough. If the new request file differs from the old one, a new file is generated.
After the first installation keep a backup copy of the .lic file and of the delivery e-mail with the key and password.
4.2.5. I selected the .lic file with “Install license file”, but nothing happens or the licensing window comes back. What can I check?¶
Check in this order:
Restart UniPlot once. Sometimes a message such as “could not install the license” is shown although the licence was taken over; after the restart the licensing window is gone.
Use the right file. The
.licfile must belong to the latest.requestfile created on this PC with the same Windows user account. A request created by an IT department on the machine does not match a different request created later by the user. If you created several requests, use the file for the latest one.Match the release. A licence generated for a newer release (for example R2026) does not work with an older release (R2025) and shows “0 days remaining”. Install the version for which the licence was issued.
Remove an old licence file. Close UniPlot, delete the old file
%APPDATA%\FEV GmbH\R2020\UniPlot\<Windows user name>.lic, start UniPlot and install the new file. Do not rename the file.Restart the PC and install the file once more.
Ask for a new file. If it still fails, send a freshly created
.requestfile (use Request license or Save request) to UniPlot support; a regenerated licence file normally installs immediately.
If the problem persists, send the latest files of the log folder (C:\Users\<user>\Documents\UniPlot\log), recorded while you install the file, together with the request file.
4.3. Trial, Student and Temporary Licences¶
4.3.1. How do I get and activate a trial licence?¶
A trial licence is requested from UniPlot (test version page of the UniPlot web site or your UniPlot contact). You receive a trial licence key and a download password. They only authorise the download and the installation:
Download UniPlot with the download password and install it with the trial key.
Start UniPlot. The licensing window shows “0 DAYS REMAINING”; this is expected until the licence file is installed.
Click Request license (or Save request and send the saved
.requestfile manually) and send the request to UniPlot support.Install the returned trial
.licfile with Install license file and restart UniPlot.
A trial licence is bound to one computer and Windows user. A trial can be activated offline (see How do I activate UniPlot on a PC without internet access or without an e-mail program?).
See also: How do I activate a single-user (node-locked) licence after installing UniPlot?.
4.3.2. My trial or temporary licence has expired. How do I continue?¶
After the end date the licence file stops working and UniPlot shows “0 days remaining”. An expired licence file cannot be reused. To continue, contact your UniPlot sales contact or UniPlot support. You then receive either a new licence key and download password or a new .lic file.
New licence key: uninstall UniPlot, install it again with the new key (the key entered during the installation must be the new one), click Request license, send the request and install the new
.licfile.New licence file for the existing key: send the original
*.requestfile, not the.licfile, because a licence can only be re-issued from the request file. Install the returned file with Install license file.
See also: Why does UniPlot show “0 days remaining” or “Evaluation”?.
4.3.3. How do I replace a temporary licence on an interim PC with the permanent licence?¶
A temporary (time-limited) single-user licence is installed like any other single-user licence: install UniPlot with the temporary key, send the request and install the .lic file. A temporary licence file cannot be converted; it simply expires. When the final PC is available, install UniPlot there with the permanent key and send a new request created on the final PC. Create the request on the PC that will really be used, because the licence cannot be moved to another PC without the procedure described in How do I move a single-user licence to a new PC or laptop?.
4.3.4. How do I install a student licence?¶
Install UniPlot with the licence key and the download password you received and activate the licence as for any single-user licence: click Request license, send the request and install the returned .lic file (see How do I activate a single-user (node-locked) licence after installing UniPlot?). The key alone does not activate UniPlot.
The licence file is valid until the end date it was issued for. To extend it, contact UniPlot support with your current licence key; you receive a new .lic file with the new end date, which you install with Install license file.
Always install UniPlot from the UniPlot download page and enter the full key during the installation (replace any old key in the field), then send a new request file.
4.4. Moving a Licence to Another PC or User¶
4.4.1. How do I move a single-user licence to a new PC or laptop?¶
A single-user licence file is bound to one computer and Windows user, so it cannot be copied. UniPlot support issues a new licence file for the new PC under the same licence key:
Contact UniPlot support and tell them that the licence is to be moved to a new PC.
Uninstall UniPlot on the old PC and delete the old
.licfile (%APPDATA%\FEV GmbH\R2020\UniPlot\<Windows user name>.lic).Install UniPlot on the new PC with the same licence key and the download password. If possible, use the same Windows user name as before.
Start UniPlot, click Request license and send the
.requestfile. Use Save request if no mail client is available. The request file of the new PC is always required.Install the
.licfile you receive with Install license file and restart UniPlot.
The old licence file does not work on the new PC.
See also: How do I move a licence if the old computer is gone or the previous user has left?, How do I activate a single-user (node-locked) licence after installing UniPlot?.
4.4.2. How do I move a licence if the old computer is gone or the previous user has left?¶
If the old PC cannot be accessed (wiped, reformatted, returned or scrapped), tell UniPlot support. Then continue as in How do I move a single-user licence to a new PC or laptop?: install UniPlot on the new PC with the licence key, create the request file there and send it.
If a colleague left the company, the licence can be assigned to a new user in the same way. Tell UniPlot support which key is to be transferred and who the new user is (Windows user name). The new user installs UniPlot with the key, creates the request file and sends it. Name the final user clearly, and keep a list of which user holds which key.
4.4.3. Can I copy the UniPlot folder or the licence file to a new PC instead of reinstalling?¶
No. Copying the UniPlot folder without running the setup does not register UniPlot correctly (file associations, registry entries), and a licence file is bound to the computer and user for which it was created. Install UniPlot with the setup on the new PC and follow How do I move a single-user licence to a new PC or laptop?.
If UniPlot shows “0 days remaining” or the licensing window stays open on the new PC, send a new request from the new PC.
4.5. Licence Rejected or Not Valid¶
4.5.1. UniPlot shows “The license is not valid for the current user and/or computer”. What changed?¶
The message appears in the UniPlot log as [License-Check] [The license is not valid for the current user and/or computer.] and UniPlot falls back to “0 days remaining”. A single-user licence stores the host ID of the computer and the Windows user or computer name. The licence file is no longer accepted when:
UniPlot is installed on a new PC, or Windows was reset or re-installed (this also applies to trial licence files),
hardware such as the network adapter or the system disk was replaced,
the Windows user name or the computer name changed, for example after a domain or Active Directory migration,
a different person works with another Windows login on the PC.
Solution:
Log in as the user who will work with UniPlot and create a new request file on this PC (Request license or Save request).
Send it with your licence key to UniPlot support. Mention the reason, for example a domain migration or a hardware change.
Install the new
.licfile with Install license file and restart UniPlot.
Copying the old .lic file back does not help. Mention the PC name in your e-mail when several PCs have the same Windows user name.
If the licence stops working at random, send the log files of the UniPlot log folder (C:\Users\<user>\Documents\UniPlot\log) with your e-mail.
4.5.3. After installing a new UniPlot version, the licence is missing or UniPlot says the licence expired. How do I fix this?¶
Current releases read the active single-user licence file for the current Windows user from %APPDATA%\FEV GmbH\R2020\UniPlot\<Windows user name>.lic, not from the installation folder. A licence file that you installed earlier is therefore normally found by a newer release as well, if it covers that release. If UniPlot nevertheless starts as evaluation version and offers the licence request:
Check that the file exists at this path for the Windows user who starts UniPlot. A different Windows user, or a different SubPath in the product ini file of the new release, means that the file is not found.
Check that the licence file covers the installed release. See Does my licence work with a newer UniPlot version? Do I need a new licence file after an update?.
If the licence file is really missing or does not cover the release, create a new request. Always create the request file freshly on the target PC; an old request file does not work.
4.6. Licence Keys Already Assigned¶
4.6.1. My request is rejected because the licence key is “already assigned” or “in use”. What does that mean?¶
A single-user licence key is assigned to the first user and PC for which a licence file was created. A second request with the same key (another PC or another user) is not processed. The key is stored in the request file during the installation of UniPlot, so a common reason is that a colleague’s key or a key that was passed on was entered in the installer.
Solutions:
Use an unused key. If you have several keys, install each PC with a different, unused key. Keep a record of which key belongs to which user.
Install with the correct key. Uninstall UniPlot completely, install it again with the correct key, and send a new request file.
Move the licence. If the licence is meant to move to you, use the transfer procedure in How do I move a single-user licence to a new PC or laptop?.
Additional licence. If you need another licence, contact the UniPlot sales team.
After you change the key always send a new *.request file. A .lic file for a colleague’s PC does not work on your PC.
4.6.2. On how many computers can I install UniPlot with one licence key?¶
A single-user licence key can be used on one computer. A delivery of three single-user licences consists of three separate keys with their own download passwords; each must be installed on one PC, and each PC needs its own .request file and .lic file. Sending several request files for one key does not work. A single request cannot cover several licences.
To share licences between users or PCs, a floating licence is the alternative: a licence server hands out licences on demand, with a limit on concurrent users. See Licensing: Floating Licences and Licence Server.
4.7. Versions and Updates¶
4.7.1. Does my licence work with a newer UniPlot version? Do I need a new licence file after an update?¶
A licence file is valid for specific UniPlot releases. If the installed release is newer than the licence file covers, UniPlot starts with “0 days remaining”. Ask UniPlot support which releases your licence covers, and install a release that is covered.
An update to a newer release normally does not need a new licence key. The download key and password only give access to the new installer; keep your licence keys.
After an update UniPlot finds the existing licence file of the current Windows user (see After installing a new UniPlot version, the licence is missing or UniPlot says the licence expired. How do I fix this?). If the file does not cover the new release, create a licence request in UniPlot, send it to UniPlot support and install the returned file.
Since R2020 a new licensing system is used. When you upgrade from R2018 or older, the licence key alone is not sufficient any more; follow How do I activate a single-user (node-locked) licence after installing UniPlot?.
To update an existing installation use Help > Check for Updates and the Download button.
See also: Help=>Check for Updates.
4.7.2. The download page does not accept my password. What can I do?¶
The download password belongs to the licence key and is sent with the key in the delivery e-mail. If the download page refuses the password:
Enter the password exactly as given in the delivery e-mail.
Click Support Status on the download page to see how long your current licence is active.
If the download still fails, contact UniPlot support with your licence key and tell which version you need.
id-647750